Installing McData 3232 - Some questions.. 1

[vptl]

I recentlly installed a McData 3232 switch I did not understand following things...

1. What is the feature keys ? What is the noticable diff w/o those keys ?

2. What is commadelim in maint mode ?

3. When I install the switch I did not have to enable web access is that by default ? or I did something and I did not even know !!

4.What is enterpriseFabMode in config mode ?

5. What is domainRSCN ?

I pulled some tech notes from McDATA but due to my limeted knowledge in SAN topology concepts I could not understand...I will appriciate if someone can explain this to me.

Thanks.
V.

Thanks ,

 

[comtec17]

1. Feature Keys are licenses that open features.

2. Command Line - Telnet to the switch.

3. The Web Tools are automatically there, you do not enable or disable it.

4. Enterprise Fabric Mode - This is a typical setting for Open Systems and not using any other vendor switch in this SAN.

5. RSCN - Registered State Change Notification. Anytime a new device is added or removed from the switch, it will send out information to all devices that this device is now there or removed.

I would read the admin guides available to you on the McData support site.