ONsiteengineer
Technical User
Does anyone know or have an instruction regarding how to install AES. Thanks a lot.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing liscence for AES
- Thread starter ONsiteengineer
- Start date
- Status
VoipMenace
Technical User
Hi ,
is your first port of call
Licenses are done through RFA portal , please remember that CMAPI lives on the PBX , all others live on the AES
is your first port of call
Licenses are done through RFA portal , please remember that CMAPI lives on the PBX , all others live on the AES
Below are the relevant instructions from the manual
Follow these steps to install the license file:
1. Locate the email containing the AE Services license file. Detach the license file from the
email, and store it locally on a PC. The PC that the license file is stored on does not have to
be same PC that the AE Services server is installed on.
2. Start your browser and type the appropriate URL based on this example:
where:
? aeshostname is your AE Services server’s host name
? port is your AE Services server’s port number (the default port number is 8080)
For example:
or
Your browser displays the Avaya WebLM page, which contains a License Administration
link and a Host ID, which is the MAC address of the NIC (in a dual NIC installation the Host
ID is the MAC address of the first NIC WebLM reads).
3. Click License Administration.
Your browser displays the WebLM Administrator Login page.
4. Accept the default User name (admin) and leave the Password blank. Then click Continue.
Your browser displays the Change Administrator Password page.
Note:
Note: WebLM issues the Change Administrator Password page the first time you log in
to WebLM. If you get a new license, you do not have to change your password
the next time you log in to WebLM.
5. Complete the Change Administrator Password page (leave the Old Password field blank
the first time you set up your password), and click Change Password.
6. Click on the back to WebLM License link.
This takes you back to the Avaya WebLM page
7. Click on the License Administration link.
The login page appears.
8. Log in as admin with the new password you specified.
Your browser displays the License Administration page.
9. Under Install License File, click Browse and locate the AE Services license file. Once you
have located the license file, click Install.
WebLM uploads the license file from your PC to the WebLM server and displays the
following message: License File is installed successfully.
If you do not receive this message, see Troubleshooting the AE Services license
installation.
This completes the AE Services license installation.
Follow these steps to install the license file:
1. Locate the email containing the AE Services license file. Detach the license file from the
email, and store it locally on a PC. The PC that the license file is stored on does not have to
be same PC that the AE Services server is installed on.
2. Start your browser and type the appropriate URL based on this example:
where:
? aeshostname is your AE Services server’s host name
? port is your AE Services server’s port number (the default port number is 8080)
For example:
or
Your browser displays the Avaya WebLM page, which contains a License Administration
link and a Host ID, which is the MAC address of the NIC (in a dual NIC installation the Host
ID is the MAC address of the first NIC WebLM reads).
3. Click License Administration.
Your browser displays the WebLM Administrator Login page.
4. Accept the default User name (admin) and leave the Password blank. Then click Continue.
Your browser displays the Change Administrator Password page.
Note:
Note: WebLM issues the Change Administrator Password page the first time you log in
to WebLM. If you get a new license, you do not have to change your password
the next time you log in to WebLM.
5. Complete the Change Administrator Password page (leave the Old Password field blank
the first time you set up your password), and click Change Password.
6. Click on the back to WebLM License link.
This takes you back to the Avaya WebLM page
7. Click on the License Administration link.
The login page appears.
8. Log in as admin with the new password you specified.
Your browser displays the License Administration page.
9. Under Install License File, click Browse and locate the AE Services license file. Once you
have located the license file, click Install.
WebLM uploads the license file from your PC to the WebLM server and displays the
following message: License File is installed successfully.
If you do not receive this message, see Troubleshooting the AE Services license
installation.
This completes the AE Services license installation.
- Status
Similar threads