I will be installing some keycodes on CallPilot 5.0 tonight to increase our desktop messaging licenses. It looks to be as simple as going through the config wizard in CP manager and entering the new keycode and rebooting. Anything else I should look for? Should I reload the language CD, or can I "next" my way through that?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing Keycodes on CallPilot 5.0
- Thread starter CTarv
- Start date
strmwalker
Technical User
CTarv..look for a small cup of coffee its that easy
when you get to the languages just check the skip
then next let it load the keycode when it tells you you need to reboot the server do so let it come back up check
to make sure things are working you done.
no problems only solutions
strmwalker
when you get to the languages just check the skip
then next let it load the keycode when it tells you you need to reboot the server do so let it come back up check
to make sure things are working you done.
no problems only solutions
strmwalker
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question