Hello, I wish to install a separate hard disk on my computer. It doesn't necessarily have to be done in windows xp cos I wish to run linux on it. How do I setup the disk so that it is ready to be used when I install linux. It is all connected up to my scsi card but I dont know what to do now. Anyhelp would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing a SCSI Hard Disk in Windows XP
- Thread starter maddave
- Start date
XP has issues with SCSI drives. They will run but not at optimum speeds. Check MSKB for more info. Just format it and go. We are always looking for new members at our computer forums: Please come join our community too.
CitrixEngineer
Technical User
Depends which version of Linux you install. Most are pretty good at recognising SCSI cards, and should identify your disc as sda. Most distros come with a partitioning tool which makes it a piece of cake to carve up your installation.
You can simply boot from the CD (after making the CD bootable in the BIOS, of course!), and any Linux distro worth its salt will just load up and launch the partitioning tool automagically.
Windows NT (2k, XP, etc), on the other hand, requires that you install a SCSI driver early on the setup process by pressing F6 at the appropriate moment and installing the driver from a floppy. It then may or may not blue screen after the installaion has appeared to be successful. Oh, and will only install if it can find a disk that has already been partitioned!
I talk from experience of "old" SCSI cards (generally over 2 years...) - newer cards are probably much better.
Hope this helps - and enjoy your Linux experience! CitrixEngineer@yahoo.co.uk
You can simply boot from the CD (after making the CD bootable in the BIOS, of course!), and any Linux distro worth its salt will just load up and launch the partitioning tool automagically.
Windows NT (2k, XP, etc), on the other hand, requires that you install a SCSI driver early on the setup process by pressing F6 at the appropriate moment and installing the driver from a floppy. It then may or may not blue screen after the installaion has appeared to be successful. Oh, and will only install if it can find a disk that has already been partitioned!
I talk from experience of "old" SCSI cards (generally over 2 years...) - newer cards are probably much better.
Hope this helps - and enjoy your Linux experience! CitrixEngineer@yahoo.co.uk
- Status
Similar threads