Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installing a Network card into a NAM 4.0

Status
Not open for further replies.
classydreams

classydreams

Vendor
Jun 27, 2014
122
US
I need to change the Redirect and COS on a NAM 4.0. I have a NAM 4.1 network card available. Can I install this card into the NAM 4.0 and will it work so I can log in via the IP address?
 
Sort by date Sort by votes
You will need the key code for NVM as well which I am pretty sure you wont find one so I wouldn't waste your time.
Keep the card in case one fails on site somewhere.

As for Redirect you can install the Redirect patch instead, download here


=----(((((((((()----=
curlycord

small-logo-sig.png

Toronto Canada
 
Upvote 0 Downvote
Thank you will this also allow the COS to be changed from F983 as it does in 4.1 and set REDIRECT to ( N ) in F983 selection ( 8 )? The instructions refer to making a diskette, I have no way to create a diskette is there an alternate way to get this patch into the NAM?

Thank you
 
Upvote 0 Downvote
No the redirect patch only changes redirect.

You can hook up a keyboard and monitor.

Marv ccna
telemarvlogosmall.gif

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
 
Upvote 0 Downvote
okay I know how to hook up the keyboard and monitor so I can take care of that.

Can I change the redirect features through using a monitor and keyboard?

Is that where I change the redirect because I have no idea how I would be able to create a diskette that technology just isn't available these days.
 
Upvote 0 Downvote
Yes you can program via the keyboard.

Marv ccna
telemarvlogosmall.gif

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
 
Upvote 0 Downvote
By the way cab I dial in to the NAM telephone modem on the unit and use the NRU to do this? I have a laptop that has an analog modem on it.
 
Upvote 0 Downvote
The monitor cable will not fit the connection the one on the NAM has fewer pins. I was able to do this on a 4.1 because it has a connector with more pns that will take the standard monitor cable.
 
Upvote 0 Downvote
There is no modem card either on that unit either but I believe I have one in another unit can I remove that modem and install it in the unit to access it via the NRU program? There is no way for me to crate a diskette I got rid of my floppy drive years ago along with my 8 Track Tape Player and Beta Max.
 
Upvote 0 Downvote
You will probably need the virtual modem driver too.

NRU is for KSU programming, you need Norstar Voicemail Manager 4.

Do you still have Win XP?

Why not take it to a vendor or possibly upgrade it of find somebody else who has a disk drive.




=----(((((((((()----=
curlycord

small-logo-sig.png

Toronto Canada
 
Upvote 0 Downvote
Installed the modem, dialed in , modem answered, logged on and then activated Voice Mil Manager, entered IP address and password and got right in and changed all the settings including COS.

Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

T
  • Question
More lines into Norstar system
Replies
10
Views
225
curlycord
curlycord
dmcdream
  • Locked
  • Question
Compact ICS Flash ROM Card - software upgrade
Replies
4
Views
443
Firebird Scrambler
Firebird Scrambler
htroberts
  • Locked
  • Question
anyone have a source for Norstar blank plates?
Replies
5
Views
530
jsaad
jsaad
Owencertified
  • Locked
  • Question
Nortel Network T7316E turn ringer back on for extension.
Replies
3
Views
354
curlycord
curlycord
Ariston
  • Locked
  • Question
PCMIA card 7.1
Replies
3
Views
170
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top