Installing 100 Base T daughterboard on an Opt. 11

[PBXYoda]

Has anyone ever installed the Ethernet daughterboard on a Opt. 11, There is no Call Server or Media Gateway. I'm just trying to connect the two cabinets together. I got these two daughterboards instead of the fiber/ Fiber reciever cards.


I have configured my ELAN, changed the Mask, added the MAC address, it still never sees the other cabinet.

I've also tried straight cables, crossover cables, flip-flop the dual-port daughter board, with the single port, moved the cards from slot 2 to slot 1. I'm just all confused.


Any help would be great. Thanks in advance.

 

[q4ayaz]

Could you post your NT Part no. and vintage of the IP daughter boards.

 

[PBXYoda]

NTDK99 is the single port
NTDK83 is the dual port

 

[dlesap]

You need to configure IPM and IPR in LD 117
Refer to thread798-1281145 but take only IPM/IPR parts
If cabinet connected through a switch, use straigh cable. If connected directly use a cross cable