Install Problem

[nsanto17]

I am having some problems...

I wanted to rebuild my home SBS server from scratch for a couple of reasons.

When i run the setup i keep getting a Blue Screen or Ran out of Virtual Memory problem.

To me this points to either a RAM problem or could be that one of the memory channels are busted. I check the MOBO manufacture and I have the most current Firmware.

Any Ideas.

Thanks

Nick

 

[markdmac]

Are you re-running setup from a reboot or from within Windows?

I would suggest replacing the memory or taking the memory to CompUSA or similar place that can test it for you.

I hope you find this post helpful.

Regards,

Mark

Check out my scripting solutions at

http://www.thespidersparlor.com/vbscript

 

[nsanto17]

I am running setup from a reboot... but i am getting all sorts of weird results. sometimes setup goes through with no problems. other times i get a blue screen.

Seems like a memory problem to me...

 

[markdmac]

I would agree.

I hope you find this post helpful.

Regards,

Mark

Check out my scripting solutions at

http://www.thespidersparlor.com/vbscript

 

[nsanto17]

Thanks again Mark

 

[AstroGuardian]

Friend, i got this same problem few times on my old rig. Did not suspect about the RAM. Instead i changed my optical drive and solved the problem once and for all.

 

[nsanto17]

I will try that b/c i am still having this issue after replacing the RAM.

 

[nsanto17]

I tried replacing the Optical Drive and contuine to have the same issue.

I seem to be getting more of a constant error.

The BSOD says

IRQ_NOT_LESS_OR_EQUAL

STOP: 0x0000000A

Anyone have any ideas... I am running out of things to try.

 

[markdmac]

Did you try [google]IRQ_NOT_LESS_OR_EQUAL[/google]?

I hope you find this post helpful.

Regards,

Mark

Check out my scripting solutions at

http://www.thespidersparlor.com/vbscript