Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Install new Replication Server for CCMS CC6

Status
Not open for further replies.
a295868

a295868

Technical User
Feb 6, 2012
2
CA
Does any one install Replication on CCMS 6 as the 3rd Server

I try to follow the NTP's 297-2183-219 start on page 465 everything was as per NTP until step 8

I log in with Administrator then sybase complete ok.

After the installShield Wizard start but the setup up just hang there untill I kill the program.

Try to start manual but had the same problem.

The Server is HP

The logs from Sysop does not show any problem here is a copy
[15:06:29 03/05/12] _UNICODE Version of wsintalldb.exe
[15:06:29 03/05/12] Current logged-on user `Administrator` is a member of Administrators Group.
[15:06:29 03/05/12] Launching window for `\wsinstalldb.exe -installSybase`
[15:06:29 03/05/12] DisplayJobStatusText(Installing the Sybase Replication Server software.)
[15:06:29 03/05/12] Non-interactive DB install for Cmd#1: 1_1_SYBASE_SERVER_UNLOAD
[15:06:29 03/05/12] createThread(RUNTIME_CLASS(CJob1InstallThread), cmd)
[15:06:29 03/05/12] SetRegistryCurrentState(1_1_SYBASE_SERVER_UNLOAD,STARTED)
[15:06:29 03/05/12]


<<<< CmdStart(1_1_SYBASE_SERVER_UNLOAD: Installing the Sybase Replication Server software.) >>>>
[15:06:29 03/05/12] DisplayJobStatusText(Installing the Sybase Replication Server software.)
[15:06:29 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\RS12.6SRV\setup.exe`.
[15:06:29 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\setup.exe`.
[15:06:29 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\RS12.6SRV\setup.exe`.
[15:07:33 03/05/12] createCmdProcess("D:\CC6_Software\REPS\database\RS12.6SRV\setup.exe" -options rsresponse.txt -silent -W SybaseLicense.agree=true -G replaceNewerResponse="yesToAll" -is:log D:\Nortel\SCCS\WS\logs\rsinstall.log, D:\CC6_Software\REPS\database\RS12.6SRV), returned exit code==0 >>>>
[15:07:33 03/05/12] Executed command: "D:\CC6_Software\REPS\database\RS12.6SRV\setup.exe" -options rsresponse.txt -silent -W SybaseLicense.agree=true -G replaceNewerResponse="yesToAll" -is:log D:\Nortel\SCCS\WS\logs\rsinstall.log
[15:07:33 03/05/12] Sybase Rep Server installer log shows that the Rep Server install was correct.
[15:07:33 03/05/12] Sybase Rep Server installed.
[15:07:33 03/05/12] DisplayJobStatusText()
[15:07:33 03/05/12] SetRegistryCurrentState(1_1_SYBASE_SERVER_UNLOAD,FINISHED)
[15:07:33 03/05/12]
<<<< CmdEnd(1_1_SYBASE_SERVER_UNLOAD: Installing the Sybase Replication Server software.) >>>>


[15:07:33 03/05/12] SetRegistryCurrentState(1_2_SYBASE_SERVER_INSTALL,STARTED)
[15:07:33 03/05/12]


<<<< CmdStart(1_2_SYBASE_SERVER_INSTALL: Installing the Sybase Replication Server software patches.) >>>>
[15:07:33 03/05/12] DisplayJobStatusText(Installing the Sybase Replication Server software patches.)
[15:07:33 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\RS12.6EBF\ebf12739\installESD5.exe`.
[15:07:33 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\installESD5.exe`.
[15:07:33 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\RS12.6EBF\ebf12739\installESD5.exe`.
[15:08:24 03/05/12] createCmdProcess("D:\CC6_Software\REPS\database\RS12.6EBF\ebf12739\installESD5.exe" -silent -P installLocation=D:\sybaseRS -G overwriteJVM="yes" -is:log D:\Nortel\SCCS\WS\logs\ebf12739install.log, D:\CC6_Software\REPS\database\RS12.6EBF\ebf12739), returned exit code==0 >>>>
[15:08:24 03/05/12] Executed command: "D:\CC6_Software\REPS\database\RS12.6EBF\ebf12739\installESD5.exe" -silent -P installLocation=D:\sybaseRS -G overwriteJVM="yes" -is:log D:\Nortel\SCCS\WS\logs\ebf12739install.log
[15:08:24 03/05/12] Sybase Rep Server installer log shows that the Rep Server install was correct.
[15:08:24 03/05/12] Sybase Rep Server EBF installed.
[15:08:24 03/05/12] DisplayJobStatusText()
[15:08:24 03/05/12] SetRegistryCurrentState(1_2_SYBASE_SERVER_INSTALL,FINISHED)
[15:08:24 03/05/12]
<<<< CmdEnd(1_2_SYBASE_SERVER_INSTALL: Installing the Sybase Replication Server software patches.) >>>>


[15:08:24 03/05/12] SetRegistryCurrentState(2_1_SYBASE_REPLICATION_SERVER_UNLOAD,STARTED)
[15:08:24 03/05/12]


<<<< CmdStart(2_1_SYBASE_REPLICATION_SERVER_UNLOAD: Installing the Sybase Server software.) >>>>
[15:08:24 03/05/12] DisplayJobStatusText(Installing the Sybase Server software.)
[15:08:24 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\ASE12.5.2\setup.exe`.
[15:08:24 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\setup.exe`.
[15:08:24 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\ASE12.5.2\setup.exe`.
[15:10:27 03/05/12] createCmdProcess("D:\CC6_Software\REPS\database\ASE12.5.2\setup.exe" -options aseresponse.txt -silent -W SybaseLicense.agreeToLicense=true -is:log D:\Nortel\SCCS\WS\logs\aseinstall.log, D:\CC6_Software\REPS\database\ASE12.5.2), returned exit code==0 >>>>
[15:10:27 03/05/12] Executed command: "D:\CC6_Software\REPS\database\ASE12.5.2\setup.exe" -options aseresponse.txt -silent -W SybaseLicense.agreeToLicense=true -is:log D:\Nortel\SCCS\WS\logs\aseinstall.log
[15:10:27 03/05/12] Sybase Rep Server installer log shows that the Rep Server install was correct.
[15:10:27 03/05/12] Sybase ASE Server installed.
[15:10:27 03/05/12] DisplayJobStatusText()
[15:10:27 03/05/12] SetRegistryCurrentState(2_1_SYBASE_REPLICATION_SERVER_UNLOAD,FINISHED)
[15:10:27 03/05/12]
<<<< CmdEnd(2_1_SYBASE_REPLICATION_SERVER_UNLOAD: Installing the Sybase Server software.) >>>>


[15:10:27 03/05/12] SetRegistryCurrentState(2_2_SYBASE_REPLICATION_SERVER_INSTALL,STARTED)
[15:10:27 03/05/12]


<<<< CmdStart(2_2_SYBASE_REPLICATION_SERVER_INSTALL: Installing Sybase Server software patches.) >>>>
[15:10:27 03/05/12] DisplayJobStatusText(Installing Sybase Server software patches.)
[15:10:27 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\ASE12.5.2ebf\ASE12.5.2SRV\ebf12599\setup.exe`.
[15:10:27 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\setup.exe`.
[15:10:27 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\ASE12.5.2ebf\ASE12.5.2SRV\ebf12599\setup.exe`.
[15:11:07 03/05/12] createCmdProcess("D:\CC6_Software\REPS\database\ASE12.5.2ebf\ASE12.5.2SRV\ebf12599\setup.exe" -options ebf12599response.txt -silent -W SybaseLicense.agreeToLicense=true -is:log D:\Nortel\SCCS\WS\logs\ebf12599install.log, D:\CC6_Software\REPS\database\ASE12.5.2ebf\ASE12.5.2SRV\ebf12599), returned exit code==0 >>>>
[15:11:07 03/05/12] Executed command: "D:\CC6_Software\REPS\database\ASE12.5.2ebf\ASE12.5.2SRV\ebf12599\setup.exe" -options ebf12599response.txt -silent -W SybaseLicense.agreeToLicense=true -is:log D:\Nortel\SCCS\WS\logs\ebf12599install.log
[15:11:07 03/05/12] Sybase Rep Server installer log shows that the Rep Server install was correct.
[15:11:07 03/05/12] Sybase ASE Server EBF installed.
[15:11:07 03/05/12] DisplayJobStatusText()
[15:11:07 03/05/12] SetRegistryCurrentState(2_2_SYBASE_REPLICATION_SERVER_INSTALL,FINISHED)
[15:11:07 03/05/12]
<<<< CmdEnd(2_2_SYBASE_REPLICATION_SERVER_INSTALL: Installing Sybase Server software patches.) >>>>


[15:11:07 03/05/12] Posting WM_CLOSE
[15:11:07 03/05/12] OnClose
[15:11:08 03/05/12] OnDestroy
[15:11:08 03/05/12] Leaving wsinstalldb.exe


=== Replication Server version: 06.00.00 installation has begun. Time:3-5-2012 15:14:06 ===
[15:14:07 03/05/12] _UNICODE Version of wsintalldb.exe
[15:14:07 03/05/12] Current logged-on user `Administrator` is a member of Administrators Group.
[15:14:07 03/05/12] Launching window for `\wsinstalldb.exe -installSybase`
[15:14:07 03/05/12] DisplayJobStatusText( )
[15:14:07 03/05/12] Non-interactive DB install for Cmd#5: 3_1_SETUP_DATABASE
[15:14:07 03/05/12] createThread(RUNTIME_CLASS(CJob1InstallThread), cmd)
[15:14:07 03/05/12] SetRegistryCurrentState(3_1_SETUP_DATABASE,STARTED)
[15:14:07 03/05/12]


<<<< CmdStart(3_1_SETUP_DATABASE: ) >>>>
[15:14:07 03/05/12] DisplayJobStatusText( )
[15:14:07 03/05/12] DisplayJobStatusText(Configuring Sybase Server)
[15:14:07 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\ASE12.5.2\perl.exe`.
[15:14:07 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\perl.exe`.
[15:14:07 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\ASE12.5.2\perl.exe`.
[15:14:07 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\ASE12.5.2\resource.pl`.
[15:14:07 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\resource.pl`.
[15:14:07 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\ASE12.5.2\resource.pl`.
[15:14:07 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\ASE12.5.2\resource_sql.src`.
[15:14:07 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\resource_sql.src`.
[15:14:07 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\ASE12.5.2\resource_sql.src`.
[15:14:07 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\ASE12.5.2\resource_bs.src`.
[15:14:07 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\resource_bs.src`.
[15:14:07 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\ASE12.5.2\resource_bs.src`.
[15:14:07 03/05/12] getPathToFile: Did not find_1:`C:\WINDOWS\system32\ASE12.5.2\resource_ms.src`.
[15:14:07 03/05/12] getPathToFile: Did not find_2:`C:\WINDOWS\system32\resource_ms.src`.
[15:14:07 03/05/12] getPathToFile: Using_3:`D:\CC6_Software\REPS\database\ASE12.5.2\resource_ms.src`.
[15:21:58 03/05/12] createCmdProcess(cmd.exe /C D:\SYBASE\ase-12_5\bin\perl.exe resource.pl sql D:\SYBASE F:\Nortel\database > D:\Nortel\SCCS\WS\logs\installdb_s03p01_resource_pl_sql.log 2>&1 , D:\SYBASE\ase-12_5\bin), returned exit code==0 >>>>
[15:22:01 03/05/12] createCmdProcess(cmd.exe /C D:\SYBASE\ase-12_5\bin\perl.exe resource.pl bs D:\SYBASE F:\Nortel\database > D:\Nortel\SCCS\WS\logs\installdb_s03p01_resource_pl_bs.log 2>&1 , D:\SYBASE\ase-12_5\bin), returned exit code==0 >>>>
[15:22:03 03/05/12] createCmdProcess(cmd.exe /C D:\SYBASE\ase-12_5\bin\perl.exe resource.pl ms D:\SYBASE F:\Nortel\database > D:\Nortel\SCCS\WS\logs\installdb_s03p01_resource_pl_ms.log 2>&1 , D:\SYBASE\ase-12_5\bin), returned exit code==0 >>>>
[15:22:03 03/05/12] DisplayJobStatusText()
[15:22:03 03/05/12] SetRegistryCurrentState(3_1_SETUP_DATABASE,FINISHED)
[15:22:03 03/05/12]
<<<< CmdEnd(3_1_SETUP_DATABASE: ) >>>>


[15:22:03 03/05/12] SetRegistryCurrentState(3_2_SETUP_DATABASE,STARTED)
[15:22:03 03/05/12]


<<<< CmdStart(3_2_SETUP_DATABASE: ) >>>>
[15:22:03 03/05/12] DisplayJobStatusText( )
[15:22:03 03/05/12] DisplayJobStatusText(Setting database services to automatic)
[15:22:03 03/05/12] Set Service 'SYBBCK_TORSYMPREP_BS' to state 2
[15:22:03 03/05/12] DisplayJobStatusText(Change service 'SYBBCK_TORSYMPREP_BS' to automatic: SUCCEEDED)
[15:22:03 03/05/12] Set Service 'SYBSQL_TORSYMPREP' to state 2
[15:22:03 03/05/12] DisplayJobStatusText(Change service 'SYBSQL_TORSYMPREP' to automatic: SUCCEEDED)
[15:22:03 03/05/12] DisplayJobStatusText()
[15:22:03 03/05/12] SetRegistryCurrentState(3_2_SETUP_DATABASE,FINISHED)
[15:22:03 03/05/12]
<<<< CmdEnd(3_2_SETUP_DATABASE: ) >>>>


[15:22:03 03/05/12] Posting WM_CLOSE
[15:22:03 03/05/12] OnClose
[15:22:04 03/05/12] OnDestroy
[15:22:04 03/05/12] Leaving wsinstalldb.exe


=== Replication Server version: 06.00.00 installation has begun. Time:3-5-2012 15:29:44 ===
=== Replication Server installation has completed successfully. Time:3-5-2012 15:29:53 ===

=== Logging started for the SU: REPS_6.0_SU_02 installation, Time:3-5-2012 15:30:00 ===
=== Logging finished the SU: REPS_6.0_SU_02 installation successfully, Time:3-5-2012 15:31:28 ===
[15:31:31 03/05/12] _UNICODE Version of wsintalldb.exe
[15:31:31 03/05/12] Current logged-on user `Administrator` is a member of Administrators Group.
[15:31:31 03/05/12] Launching window for `\wsinstalldb.exe `
[15:31:31 03/05/12] DisplayJobStatusText( )
[15:31:31 03/05/12] Non-interactive DB install for Cmd#7: 3_3_SETUP_DATABASE
[15:31:31 03/05/12] createThread(RUNTIME_CLASS(CJob3InstallThread), cmd);
[15:31:31 03/05/12] CheckPreConditions: Database Version=06.00.00
[15:31:31 03/05/12] Start up database services
[15:31:31 03/05/12] DisplayJobStatusText(Starting up service 'SYBBCK_TORSYMPREP_BS')
[15:31:31 03/05/12] Start up service 'SYBBCK_TORSYMPREP_BS': SUCCEEDED
[15:31:31 03/05/12] DisplayJobStatusText(Starting up service 'SYBSQL_TORSYMPREP')
[15:31:31 03/05/12] Start up service 'SYBSQL_TORSYMPREP': SUCCEEDED
[15:31:31 03/05/12] SetRegistryCurrentState(3_3_SETUP_DATABASE,STARTED)
[15:31:31 03/05/12]


<<<< CmdStart(3_3_SETUP_DATABASE: ) >>>>
[15:31:31 03/05/12] DisplayJobStatusText( )
[15:31:31 03/05/12] DisplayJobStatusText(Creating the databases)
[15:31:36 03/05/12] createCmdProcess(cmd.exe /C D:\Nortel\SCCS\WS\dbinst\wsdb_set.bat PWD PWD PWD > D:\Nortel\SCCS\WS\logs\installdb_s03p03_wsdb_set.log 2>&1 , D:\Nortel\SCCS\WS\dbinst), returned exit code==0 >>>>
[15:31:36 03/05/12] Log 'D:\Nortel\SCCS\WS\logs\installdb_s03p03_wsdb_set.log' successfully scanned.
[15:31:36 03/05/12] DisplayJobStatusText()
[15:31:36 03/05/12] SetRegistryCurrentState(3_3_SETUP_DATABASE,FINISHED)
[15:31:36 03/05/12]
<<<< CmdEnd(3_3_SETUP_DATABASE: ) >>>>


[15:31:36 03/05/12] SetRegistryCurrentState(3_4_SETUP_DATABASE,STARTED)
[15:31:36 03/05/12]


<<<< CmdStart(3_4_SETUP_DATABASE: ) >>>>
[15:31:36 03/05/12] DisplayJobStatusText( )
[15:31:37 03/05/12] Successfully installed service "REP_Monitor"
[15:31:37 03/05/12] DisplayJobStatusText()
[15:31:37 03/05/12] SetRegistryCurrentState(3_4_SETUP_DATABASE,FINISHED)
[15:31:37 03/05/12]
<<<< CmdEnd(3_4_SETUP_DATABASE: ) >>>>


[15:31:37 03/05/12] SetRegistryCurrentState(3_5_SETUP_DATABASE,STARTED)
[15:31:37 03/05/12]


<<<< CmdStart(3_5_SETUP_DATABASE: ) >>>>
[15:31:37 03/05/12] DisplayJobStatusText()
[15:31:38 03/05/12] createCmdProcess(D:\Nortel\SCCS\WS\bin\RSnbsa_add.exe -a -e , D:\Nortel\SCCS\WS\bin), returned exit code==0 >>>>
[15:31:38 03/05/12] Successfully created user NortelRS.
[15:31:39 03/05/12] Successfully set user environment variables "SYBASE_JRE" for user NortelRS.
[15:31:39 03/05/12] Successfully set user environment variables "SYBASE" for user NortelRS.
[15:31:39 03/05/12] Successfully set user environment variables "LM_LICENSE_FILE" for user NortelRS.
[15:31:39 03/05/12] DisplayJobStatusText()
[15:31:39 03/05/12] SetRegistryCurrentState(3_5_SETUP_DATABASE,FINISHED)
[15:31:39 03/05/12]
<<<< CmdEnd(3_5_SETUP_DATABASE: ) >>>>


[15:31:39 03/05/12] Posting WM_CLOSE
[15:31:39 03/05/12] OnClose
[15:31:40 03/05/12] OnDestroy
[15:31:40 03/05/12] Leaving wsinstalldb.exe



 
Sort by date Sort by votes
Did you review all the information starting at page 450 for the configuration of the OS? Did you also review the planning and engineering guide to ensure your server meetings requirements?
 
Upvote 0 Downvote
Yes I did start on page 450 for the OS.

This Server was just rebuild because of hardware failure.

The hardware was replace like for like.

I will review the Engineering guide

Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nihaalrai236
  • Locked
  • Question
Nortel Option 11C RLS 25 asking for "MODL"
Replies
4
Views
473
Firebird Scrambler
Firebird Scrambler
MatthewOK
  • Locked
  • Question
CS1000 7.65 re-install, replace OEM drive with SSD Drive?
Replies
1
Views
134
rhne51
rhne51
John Tel
  • Locked
  • Question
CS1K Signaling Server partition full /dev/hda10 (Not the normal /var issue). Directory not working.
Replies
4
Views
340
John Tel
John Tel
volnut11
  • Locked
  • Question
Install disk for 68060E CP4 rls 23.55
Replies
4
Views
115
volnut11
volnut11
brison
  • Locked
  • Question
CS1000 2921 install file 1
Replies
3
Views
104
brison
brison

Part and Inventory Search

Sponsor

Back
Top