Install 4.11 on HP2110 Server, not having any luck

[goldon]

Trying to install Novell 4.11 on a HP2110 Server with 128m memory and two 40G HD.
Can't get drives formatted or install software. Is this just a bad match or is there a
trick???

 

[spi200]

Hi there

It sounds like very little memory to mount such large disk drives. Try adding more memory or try to only install on say 2gb for SYS volume. Once SYS is installed and Netware is up and running you can add DATA volumes later thru INSTALL.nlm
Other wise there are no other tricks. If using DOS 6.22 then I only have the following in the config.sys
Files=20
Buffer=20
These are required for the CDROM to work.

good Luck

David CNE

 

[goldon]

Thanks Dave, we are trying the smaller HD option I will let you know
if we are successful......