INSERTING DIGITS AFTER DIALING ACOD

[Tomiga1]

Hi, I'd like to know if it is possible to insert a "1" automatically after dialing the ACOD. I'm asked to have callers be able to dial ACOD and then 10 digits.....they wouldn't dial a 1 first.

Thanks!

 

[jamie2]

Why do you want the caller dialing the ACOD instead of just routing the caller out the same route (where it would be much easier to insert the one?)

 

[Tomiga1]

Jamie2, at this time, the only way to access that route is to dial the ACOD.

 

[GHTROUT]

Let's say your ACOD was "8"

[ol 1]
[li]Change the "8" to some other number.[/li]
[li]Now create a LD86 DMI that does INST 1[/li]
[li]Then create an LD86 RLI that references the Trunk Route and your new DMI[/li]
[li]Then create a LD87 CDP Steering Code of "8" and point it to the RLI you just made.[/li]
[/ol]





~~
Gene at www.GHTROUT.com

 

[allenmac]

This is something that we used to set up for people that wanted the system to either add a leading 1 to long distance calls, or delete the 1 from local calls, usually in areas where a single area code spanned several latas.

You can use either FCAS tables if you know the specific exchanges within each area code that would require a 1, or you could just build a DMI that would add the 1 to all numbers that hit a particular RLI.

For instance, if your callers dial 9301NXXxxxx (ACOD+NPA+NXX+xxxx) and LD 90 is set to send that call to RLI 1, then just build a DMI in LD 86 that inserts '1', and enter it in the DMI prompt for your entry's in RLI 1.

 

[GHTROUT]

Remember, if you are using the ACOD, then you are not using BARS or an RLI, and LD90 does not apply.

~~
Gene at www.GHTROUT.com