Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Inserting 012e card into new 5 slot carrier
- Thread starter rcaptech
- Start date
hey rcaptech,
I've had problems also with these new carriers. I noticed the modules dont interlock with each other like in the old ones. It looks like avaya made the slots a little bit farther apart. If you try to interlock the modules together they wont go in. Ive used a 1/2 dozen of the new ones and they were all the same so I'm assumin yours is to.
Hope helpful.
I've had problems also with these new carriers. I noticed the modules dont interlock with each other like in the old ones. It looks like avaya made the slots a little bit farther apart. If you try to interlock the modules together they wont go in. Ive used a 1/2 dozen of the new ones and they were all the same so I'm assumin yours is to.
Hope helpful.
itpphoneguy
Technical User
Yup, make sure the locking tab doesn't interfere as well. They fit fine otherwise.
-Chris
-Chris
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question