Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

InoculateIT 4.5 and NetWare 4.11

Status
Not open for further replies.

120760

MIS
Feb 8, 2002
6
0
0
GB
Unable to add another netware server to the InoculateIT domain. Reset router on master server and other server, both serverS can see each other. Unloaded Inoculate on server and re-loaded, no change.
When modifying the domain this specific server is not listed and unable to add. HELP.
 
It sounds like you are using the Workgroup edition of InoculateIT. W/E limits you to one server. The Advanced Edition(A/E) allows more servers than one. If this is not the case then check the first frametype being loaded on the NW4.11 servers. Make sure it is 802.2. Also check your w/s client for the use of IPX as the preferred protocol. (assuming you are using Novell's Client32). If you happen to be using Inoculan then you will need a license for each NetWare server.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top