Trying to create a very high availablity network. We run an MPLS network with T1s going to the cloud. Each office has its on Nokia/Check Point NG with a DIA T or more. We have a VPN meshed network setup incase MPLS goes down.
However we do not have a dynamic means to route Internet traffic from one office to another in case an Internet circuit goes down.
The problem is, there is no way for the DIA router to tell the Core not to use the firewall as the default route.
We have OSPF on the internal interface of the firewall, however cannot use it for the external interface of the firewall due to looping issues with our VPN setup.
Any ideas?
However we do not have a dynamic means to route Internet traffic from one office to another in case an Internet circuit goes down.
The problem is, there is no way for the DIA router to tell the Core not to use the firewall as the default route.
We have OSPF on the internal interface of the firewall, however cannot use it for the external interface of the firewall due to looping issues with our VPN setup.
Any ideas?