Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

INI During MIDN

Status
Not open for further replies.

don2119

Technical User
Aug 13, 2008
91
0
0
US

% INI000 00000041 02 55 51 00000000 00000000 00000000 00000000 0 ? 00000081
% DSET000 25/10/12 02:56:03 1509204
% OPRDATA: DOWN LOAD 0 0 0 0 0 0 0 0
%
% INI002 25/10/12 02:56:04 1509205
% OPRDATA: 0000008B 0000008C 0000008D
%
% INI007 25/10/12 02:56:04 1509206
% OPRDATA: 0000007E 0000007F 0000006E 0000006F
%
% *** INI109 25/10/12 02:56:04 1509207
% OPRDATA:
% ACDR ACTIVATED
This happened in LD 43 after back up to the system and before the save to Compact flash.
This has happened before. I had re-run MIDN 4 times without error after this. I have run Back-ups also without incident.
Does anybody have any ideas what might be going on.
The system all checks out in ld 135, 60, 39, etc.
Any assist would be much appreciated.
 
I've found a reference at release 5.0 for Q01909434 'INI000 00000041 after BERR0705 EXC 0: Exception 14 in Task ''tVitn'.

I think a patch was produced. What release is your system.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Release 5.0 DSN I know there was a patch produced for 3.0 DSN They have all the latest and Greatest.
the problem has since stopped happening. I ran at the time four MIDN routines after that with no issue so I am now watching everyday. sorry it took so long to get back to you I have been out of pocket.
Thanks again!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top