Info on switch

[phdude]

I have a friend/customer who has a Meridian switch and I am interested in finding out what level of software it has.
I have a list of cards etc. listed below. Could someone tell me what I need to do to get the correct info. Is it an Option 51 or 61? I appreciate this forum and all the knowledge that goes with it. Most of the meridian systems I install are 0 x 32 and smaller. Just don't know about the larger equipment.

bwblanton@peoplepc.com

1 CABINET WITH 3 SHELVES, CARDS, AND POWER SUPPLY.
1 NT6 D40BA
1 NT6 D42CD
1 NT8 D14BB
2 NT8 D02EB
1 NT8 D09AL
2 NT8 D02GA
5 NT8 D09AK
1 NT8 D16AB
2 NT8 D09BA
1 NT8 D01BC
1 NT8 D02AB
2 NT8 D17FA
1 NT5 D12AA
1 NT8 D04BA
2 QPC 471H
3 QPC 43 R
2 QPC 441 F
3 NT6 D41AD
2 NT6 D65AA
1 NT5 D61AB
2 QPC 414C
1 NT5 D10AA
1 NT5 D61AA

 

[Reusser]

Look at the shelves - if there is one CPU-Common Equipment it is a 51 two - it is a 61. Look at the software disks - it should show the software level or if powered up go to LD 22 and type ISS at request promt.

 

[phdude]

Reusser,

Ok I will go check it. Do the cards tell you anything?

thanks!

 

[Reusser]

Hard to say - you have 3 QPC43r only need two and two of most other CPU cards indicating a 61C but you only have one CPU NT5d10

I suspect this is a 61C. but can not tell software level.

 

[Supernn]

Can you tell us the following info?
LD 22
REQ ISS

It reply's you with the hardware version as well as the current software release