Info for CallPilot Mini for Opt-11 vs CallPilot 150 for Norstar MICS/CICS

[Kloog]

Just adding this as FYI only for general lookups. There still seems to be confusion about the difference between CallPilot Mini for Opt-11 and CallPilot 150 for a Norstar MICS/CICS.

The Call Pilot cabinet is the same for a CP Mini or a CP 150. The difference is in the software card. If it is a CP Mini for Option 11 the software card will have model code NTZE47xx designation. If it is a CP 150 for Norstar the software card will have model code NT5B82xx designation. You cannot use a CP Mini on a Norstar or CP 150 on an Option 11...unless you flush & replace the loaded software & software card.


Link to a PDF brochure for CP Mini for Option 11 systems:

http://www.nxg-c.com/PDFDocs/Nortel Brochures/Messaging Solutions/Brochure for CPmini.pdf

Link to a PDF brochure for CP 150 for Norstar systems:

http://www.vpcgroup.ca/brochures/callpilot150.pdf