Increase volume on analog phone 1

[pguerrero]

I have an analog phone on a NEAX2000 IVS PBX that is not loud enough. Is there a setting or switch that controls this?

Thanks,

Pedro

 

[grh959]

Unfortunately there is not. YOu can do 1 of 2 things:

1) Adjust the PAD on your trunks BUT it will affect the system.

2) Get an analog phone with an amplified handset. (which is what I would do)

Gary

http://www.gcti.com/contact.asp

 

[neax]

Set Command 1309 to a "0" for the analog sets. This will remove the 6dB pad on the station(s).