increase the number of B channels in an ISDN "hipath 4000 V1.0"

[youfo007]

hello,

I want to change the number of B channels in an ISDN connection, because I have two B channels free and the other two are already assigned to a line S0, but they are not used, so I'm looking for a solution removed and added the Trunk in question.

my current setup on the parameter TDCSU BCHAN = 1 && 24.

thank you

 

[AbdulRashid]

ACT-DSSU:AUL,BCHAN,(BCHAN WHICH TO BE ON/OFF);

 

[youfo007]

Here's how to procede:

del-tdcsu
PEN = 1-1-25-1
M40: APPLICABLE GROUP CONDITION: MAXIMUM OF 1 OUT OF 3 PARAMETERS
BCHAN = ?
BCHAN : B-CHANNELS
CHARACTERISTIC : OPTIONAL
NO. 1 MEMBER OF A GROUP
POSSIBLE VALUES : 1-30
BCHAN = ( you can delete a number of b-channel for exemple 6 b-channel: "24&&30") .

 

[youfo007]

and now I'm trying to remove a Trunk S0, here is what it gives me


DEL-TDCSU:1-1-85-2,1;
H500: AMO TDCSU STARTED
F33: COULD NOT DELETE PEN 1-01-085-2
F15: CANNOT DELETE LAST B-CHANNEL OF TGRP 30,
SINCE THE TRUNK GROUP IS ASSIGNED TO A ROUTE

AMO-TDCSU-111 DIGITAL TRUNKS
DELETE NOT COMPLETED;

 

[youfo007]

I started by removing the wabe

<del-wabe
TYPE = ?
TYPE : DESIRED OPTION
CHARACTERISTIC : REQUIRED CONDITIONAL
POSS. VALUES : DPLN DIAL PLAN / FEATURE ACCESS GROUP
CD ACCESS CODE / STATION NUMBER
TYPE = cd
CD = 2950&&2999
DPLN =
CPS =
DAR =
M19: PARAMETER MUST BE SPECIFIED
DAR = stn;
DEL-WABE:CD,2950&&2999,,,STN;
H500: AMO WABE STARTED

AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES
DELETE COMPLETED;
<DEL-WABE:CD,2800&&2822,,,STN;
DEL-WABE:CD,2800&&2822,,,STN;
H500: AMO WABE STARTED

AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES
DELETE COMPLETED;

after I remove the LDAT


<del-ldat
KIND = ?
KIND : DELETION KIND
CHARACTERISTIC : REQUIRED CONDITIONAL
POSS. VALUES : LDSRT DELETE ALL LDSRT NUMBERS FROM AN LROUTE
LRTEL DELETE INDIVIDUAL LCR ROUTE ELEMENTS FROM A LROUTE
LROUTE DELETE ALL LCR ROUTE ELEMENTS FROM A LROUTE
KIND = lroute
LROUTE = 030;
DEL-LDAT:LROUTE,030;
H500: AMO LDAT STARTED
H08: LROUTE 30 LSVC ALL WAS DELETED

AMO-LDAT -111 LCR-DIRECTIONS
DELETE COMPLETED;


Now when I delete the richt, it gives me the message " F04: FOR CD 30 AND DPLN AND CPS, NO UNIQUE DAR EXISTS.
PLEASE CHECK BY USING DISP-WABE OR DISP-RICHT
F14: NO ROUTES ASSIGNED ".


<del-richt
MODE = cd
CD = 30;
SVC = all;
TYPE =
M19: PARAMETER MUST BE SPECIFIED
TYPE = ?
TYPE : DESIRED ROUTE CODE OPTIONS
CHARACTERISTIC : REQUIRED CONDITIONAL
POSS. VALUES : LRTE LCR ROUTE NUMBER
CQMAX CALL QUEUE CAPACITY
NAME NAME
TGRP TRUNK GROUP NUMBER
CD CODE
ALL ALL
TYPE = all;
DEL-RICHT:CD,30,,,ALL,ALL;
H500: AMO RICHT STARTED
F04: FOR CD 30 AND DPLN AND CPS, NO UNIQUE DAR EXISTS.
PLEASE CHECK BY USING DISP-WABE OR DISP-RICHT
F14: NO ROUTES ASSIGNED

AMO-RICHT-111 TRUNK ROUTING
DELETE NOT COMPLETED;


for reg-wabe and reg-richt, I have two parts that I do not know how to delete them

ADD-RICHT:CD,30,030,,
,0,
ALL,"LIA SMISI ",,,
30,
,,,30,,,,,,130,,,130,NEUTRAL,NO;


ADD-WABE: 030 , , , NETRTE , N,,,,
, , , , ;



please, is that He is a solution to remove the Trunk squarely with these roads.??????????????