Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

increase bip delay during conference 1

Status
Not open for further replies.

tekkanet

Technical User
Jun 27, 2005
80
IT
Hello all, IP Office 406 and 5410 phones.
If I set up a conference call, I get a bip every 10 seconds.
Can I switch off this bip or increase the delay, such as every minute or 5 minutes?
Thanks
Gianluca
 
go to:

System
Telephony
Conference Tone - uncheck this box will take off the 10 second notification.

From IPO Manager help file:
Conferencing Tone: Default = Off
This settings controls how conference tones are used. When off, a single tone is heard when a new party joins a conference and double-tone is heard when a party leaves a conference. When on, a conference tone is heard every 10 seconds by all conference parties.





Great works are performed, not by strength, but by perseverance.
-Samuel Johnson
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top