Inconsistent data

[motard]

Hi, The system is BC9 and 10 LIMS. Somebody can help me:

<dusyi;
SYSTEM DUMP INFORMATION
INCONSISTENT DATA DUE TO LAST RELOAD OF DATA WAS ERRONEOUS

<allip;
DATE: 07MAR07 TIME: 08:54:41
CODE CLASS NOAF EXPLANATION
42 2 10 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
85 2 1 BUFFER TRANSFER HAS FAILED

 

[dstrang1]

You need to figure out why the data reload is failing -- you'll not get a good system dump until that issue is solved. I hope you have your most recent data changes logged.

Send GJLSPRINT=FAULTY; twice.....are the PCM links OK?

Send HIREI; and ALREI; You should get a "RELOAD REQUESTED" response back from the switch. If the relaod fails again, look at the alarm log (ALLOP, not ALLIP) and see which LIM is failing. You can also look at the history (HIEDP, HIMDP)to see if there's something going on with LIM 1. Post back with results.

Good luck,

Dave Strang

 

[motard]

Hi, all the PCMs are ok.
I get " RELOAD REQUESTED " with alrei as you say.
This is ALLOP command:
DATE: 07MAR07 TIME: 09:56:23
CLASS: 2
85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4
07MAR07 08:47:44 2 6 001-0-52-00 69 390 2 1 1

114 DEVICE BOARD HAS BEEN ACTIVATED
DATE TIME ALP NOIF EQU BRDID
07MAR07 09:11:54 13 1 001-0-52-00 69

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:09 3 6 001-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:09 4 6 002-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:09 5 6 003-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:09 6 6 004-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:09 7 6 005-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:10 8 6 006-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:10 9 6 007-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:10 10 6 008-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:10 11 6 009-*-**-** 26 1 94

42 RELOAD OF EXCHANGE DATA IN LIM HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3
07MAR07 09:46:10 12 6 010-*-**-** 26 1 94

 

[dstrang1]

You can try to restart the IPU (RFBOI:BPOS=1-0-52

Then clear alarms and history and wait to see if you get a code "40" (successful data reload.

If no change, Send RFPUI:LIM=1,UNIT=CIH;

Clear alarms and history and wait for results.

If none of this works, please post the printout from HIMDP:LIM=1;

Good luck,

Dave Strang

 

[thedayaftertomorrow]

Hi motard
DUBDP; print out send me

 

[whosrdaddy]

short and painfull: LALRL:LIM=ALL;

but check dump first...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[motard]

Hi dstrang1

IPU restarted the problem still the same.
RFPUI sent, no changes...

<himdp;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
08:19:12 08MAR07
DIAGNOSTICS FROM LIM 001

TIME DATE ERROR CODE
08:19:08 08MAR07 H'44
COMMUNICATION STATUS ERROR AT BUFFER TRANSFER
SEND ERRORS, DUPLEX MODE = 000
RECEIVE ERRORS, DUPLEX MODE = 001
SEND ERRORS, SIMPLEX MODE = 000
EXE A IN LIM 001

Hi thedayaftertomorrow.

<dubdp;
BACKUP DATA
BUFFER TRANSFER ERROR
END

 

[thedayaftertomorrow]

Hi motard
send before LALRL;
You should take pc regen of the system
Best Regard

 

[motard]

Hi thedayaftertomorrow
LALRL=LIM=ALL ??? LALRL=LIM=1 ???
Coul the Exchange go out of service????

 

[whosrdaddy]

LALRL=LIM=ALL ??? LALRL=LIM=1 ???
Coul the Exchange go out of service????

duh! yes it will. this is the cleanest way out...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[thedayaftertomorrow]

Hi motard
LALRL:LIM=ALL; after approximate Exchange 1 hour go out of service

 

[motard]

Hi whosrdaddy
only while data and programs are reloaded??? If something fails could stand out of service for a long time???

 

[whosrdaddy]

this is always a risk with bigger systems. it depends on how many remote lims you have + the quality of your systems links...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dstrang1]

I wouldn't expect an LALRL:LIM=ALL; to be successful, the problem is in LIM 1......he's got a reload executing/trying to execute for the whole exchange now that won't go.......

If restarting the IPU or the unit doesn't work, I'd recommend poking the LPU in LIM 1 for a reload.....nothing like a good hard reset to straighten things out.

For BC9, it should take about 15 minutes for the LIM to reload after you poke it.

Dave Strang

 

[motard]

Hi, LALRL:LIM=1 was sucessfull
Thanks for your valuable help.