Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Incoming call DDI and stuff

Status
Not open for further replies.

YEberle

Technical User
Jun 29, 2005
21
FR
Hi guys,

I work with my 3300 ICP (Rel 8) and i have some trouble to set up incoming call to a group.

The 3300 is fitted with a ISDN-BRI card.

Incoming call today : XXXXXX9306 go to 9306 (work fine)

What i want to do : XXXXXX9306 go to 9321

9321 is a Ring Group with member (9306 and 9322)

Ive try different setup but no result, anyone ?


 
you can create 9306 as a speed call entry that dials 9321

*******************************************************
Hard work often pays off after time, but laziness always pays off now.
 
Gratz for your fast reply

Works fine :
I've create my ring group 9321 and a speed call 9306 that dials 9321
Incoming call on ISDN-Bri XXXXXX9306 ring 9321 and group member 9322,9317,9313 in unison.

but i've delete the DN 9306 :( witch is my Nokia E65 Sip desk phone and move the DN to 9322.

So is there a other way to do this without delete the DN 9306 ?
Just say that : Incoming call on ISDN-BRI XXXXXX9306 is reroute on XXXX DN ?

Thank's anyway :)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top