Incoming Alog lines on Meridian system 1

[RussellMcL]

I ned to know how to program incoming lines on an old BT Meridian system, using the main keyphone.

Ideally, I will present all incoming calls to a ringing group, and also program an in/out of group button on each handset.

Is there a guide / manual I can consult?

Finally, is there a default password that needs to be known to program this?

Many thanks.

 

[acewarlock]

BT Meridian system doesn't tell us much, it's like saying I have a Ford or Chevy. There should be a model number on it somewhere and IF this phone can be programmed with the Main phone, then your in the wrong forum, you want the Norstar forum.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[johnpoole]

using the main keyphone.

if that is a true statement, you need to be in the northstar forum.. this one does not program from a phone or have "keyphones".. the station type alone will help you get to the right forum... if that phone is a 7xxxx its a northstar... if it is a 2xxx then your in the right forum.. but you need term access

john poole
bellsouth business
columbia,sc

 

[RussellMcL]

Thanks - it is mostly 7316 handsets, so I will repost in the Northstar forum.