MaximusBrian
IS-IT--Management
Hey guys,
I am a bit stumped on this one.
setup: IPO R11 w/ VMPRO
issue: when call comes in, it takes 8-10 seconds for the AA to answer. I was looking around for settings that may control that but didnt see anything.
test:
setup: IPO R9.1 w/ VMPRO (test machine)
notes: when you dial a DDI from an external source, AA picks up immediately.
I was looking to compare settings under the "System -> telephony" and "Line" but not seeing anything that's glaring out.
I am a bit stumped on this one.
setup: IPO R11 w/ VMPRO
issue: when call comes in, it takes 8-10 seconds for the AA to answer. I was looking around for settings that may control that but didnt see anything.
test:
setup: IPO R9.1 w/ VMPRO (test machine)
notes: when you dial a DDI from an external source, AA picks up immediately.
I was looking to compare settings under the "System -> telephony" and "Line" but not seeing anything that's glaring out.