Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inboud calls failing BCM100 4.0

Status
Not open for further replies.

GonzoTech97

Programmer
May 12, 2005
45
US
On my BCM 1000 4.0 with a PRI, I am getting a fast Busy or recording stating "all circuits are busy" When dialing in. When the DTI is disabled and re-enabled inbound calls resume for about 20 minutes then go down. All the while I never loose the ability to dial out.

The T1 never looses sync.

Thanks in advance.
 
Sounds like the circuit is slipping, also the latest SU patch fixes PRI related issues.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top