Hi:
On a storage node, when I run the inquire command, I have the folowin message:
NetWorker: SYSTEM error: failed to set SCSI timeout on device '/dev/nst0' (Inappropriate ioctl for device)
scsidev@2.2.0: |Disk, /dev/nst0
NetWorker: SYSTEM error: failed to set SCSI timeout on device '/dev/nst1' (Inappropriate ioctl for device)
scsidev@2.3.0: |Disk, /dev/nst1
if I run the stinit command, the result is:
stinit, processing tape 0
The manufacturer is 'IBM', product is 'ULTRIUM-TD3', and revision '6B20'.
stinit, processing tape 1
The manufacturer is 'IBM', product is 'ULTRIUM-TD3', and revision '6B20'.
This is OK, but inquire can't access to the tape drive.
Someone know what is the problem?
Gabriel
On a storage node, when I run the inquire command, I have the folowin message:
NetWorker: SYSTEM error: failed to set SCSI timeout on device '/dev/nst0' (Inappropriate ioctl for device)
scsidev@2.2.0: |Disk, /dev/nst0
NetWorker: SYSTEM error: failed to set SCSI timeout on device '/dev/nst1' (Inappropriate ioctl for device)
scsidev@2.3.0: |Disk, /dev/nst1
if I run the stinit command, the result is:
stinit, processing tape 0
The manufacturer is 'IBM', product is 'ULTRIUM-TD3', and revision '6B20'.
stinit, processing tape 1
The manufacturer is 'IBM', product is 'ULTRIUM-TD3', and revision '6B20'.
This is OK, but inquire can't access to the tape drive.
Someone know what is the problem?
Gabriel