INA data question

[phoneuser]

We have connected 2 Magixs with Point to Point
Voice is channels 13-23 D is the 24th both sides
centralized Voicemail works as does UDP between sites

Site A
Ether 0
address 192.168.0.5
Broadcast 255.255.255.0
gateway 192.168.0.1
*we can ping 192.168.0.5 from any workstations!

Wan 0
local 10.0.0.1
dest 10.0.0.2 (set for 255.255.255.255 learns far end!)
broadcast 255.255.255.0
Ping test form Console Port:
*we can ping 10.0.0.2 or Telnet 10.0.0.2 and Log into
far ends INA router using CONSOLE PORT)
*we can ping any address on the 192.168.0.1 side

Site B
Ether 0
address 192.168.111.3
Broadcast 255.255.255.0
gateway 192.168.111.1
*we can ping 192.168.111.3 from any workstations!

Wan 0
local 10.0.0.2
dest 10.0.0.1 (set for 255.255.255.255 learns far end!)
broadcast 255.255.255.0
Ping test form Console Port:
*we can ping 10.0.0.1 or Telnet 10.0.0.1 and Log into
far ends INA router using CONSOLE PORT)
*we can ping any address on the 192.168.111.1 side

What we can not do is get from any machine on either site
192.168.0.1 to 192.168.111.1 (from site A to B or B To A)
even if we use FLIPPED patch cord on ETHERNET Port of INA
reversing pairs 12 and 36 Orange & green pairs and setting
address on Laptop

What are we missing ???
set for DNS
PTP
speed 64000

its been awhile since I had done this ...its always something
simple ??

Phoneuser

 

[t3chhelp]

You need to program in the default gateway a static route pointing 192.168.111/24's to go to 10.0.0.2 and vice versa. Hope that clears it up for you. If you need more help, feel free to ask.

 

[t3chhelp]

For site A, program a static route of 192.168.111/24 to go to 10.0.0.2 in your default gateway router and in site B program a static route of 192.168.0/24 to go to 10.0.0.1 in the default gateway router. Hope that clears things up.