Customer had a BCM 200 go down, so their IT company sent out a MICS as a temporary replacement. MICS has 7.1 software with a 6 port fiber combo card as well as a T1 card. Boot up the system, and phone comes up "In Maintenance". Tried to remove cards and boot up that way, but phone flashes continuously. Any troubleshooting thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
In Maintenance
- Thread starter rval80
- Start date
curlycord
Programmer
Is this fixed yet?
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
curlycord
Programmer
The system might also be looking for the original hardware that used to be attached.
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
- Thread starter
- #5
phoneguy427
Technical User
A thank you might be in order rval80
curlycord
Programmer
More importantly always close off a thread with a statement with fixed and how etc like you just did, thanks.
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
- Status
Similar threads
- Locked
- Question
- Locked
- Question
