In Avaya CM 5.2.1, Which is Linux string command to get SNMP Community and System Description

[avaya033]

Hello

I am Enableling SNMP Service in the Avaya Web Interface of CM 5.2.1 for one of my customers. For some reason if i perform the Test SNMP Command through the Web Interface I am recieve the error Test okay at my Monitoring Spectrum Server. If I provoke a error like removing any Board from the PBX, We do not recieve any Knowlege for the specific board remove eventhough they ar all program in the SNMP Filter. I am not knowlegeble in Linux Command, I am able to connect to the Linux, but I need the correct Linux Command to provide Avaya the SNMP Version, SNMP Community and SNMP System Description. I got already SNMP Version. I wrote down the following command below for SNMP Version ( snmpget -V ), but I do not know how is the correct command in order to get the information Community and System Description requested by Avaya. Can somebody help me and send the correct string.

dadmin@tribsanjuan_1> snmpget -V
NET-SNMP version: 5.1.2
dadmin@tribsanjuan_1>

Thanks

 

[AvayaTier3]

cat /etc/opt/ecs/alarm_snmp.conf
almsnmpconf

almsnmpconf -d 10.12.14.16 -e y -c P8ssw0rd -add

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[AvayaTier3]

almsnmpconf -?

Usage: almsnmpconf [-d IP] [-c community] [-b [y|n]] [-e y|n] [-add|-del|-mod]
no argument: display current administration
-d: send traps to IP address
-c: set trap community name to community
-b: enable alarm abbreviation for SNMP y|n; default: y
-e: enable trap destination y|n
-add: add new trap destination
-del: remove trap destination
-mod: modify trap destination
-?: show usage


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com