importing devices into RME from remote NMS

[Johnfokker]

Hello

Can any one help me with this??
I have integrated ciscoworks2000 rwan with HP OV NNM.
both systems are on seperate machines. w2k servers PIII 1.4 GHz, and 1024 MB Ram, 36 GB hdd.

The installation and integration was without a problem, Now I want to import the devices discovered with NNM into the Resource manager of CiscoWorks. I know there is a menu item to do this, but it only works when the remote machine is a UNIX machine. My readcommunity strings are set right.

So is their a easy way to import all the dicovered cisco devices from NNM into the Resource manager? When you are using a two w2k machines????

Thanking everyone in advance
Greetings

John Fokker
IP Engineer

Xantic b.v.
P.O. Box 850
1200 AW Hilversum
The Netherlands
Witte Kruislaan 47
1217 AM Hilversum

john.fokker@xantic.net

 

[nbowden]

You need to carry out the procedure described as a remote upgrade.

See the following doc for the full process :

http://www.cisco.com/univercd/cc/td...000_b/rwan_sol/1_2_mar2/rwanbupd.htm#xtocid18

This is for CD1. There are similar for RME etc.

Best of luck.

Nigel.

 

[Johnfokker]

Nigel,
Thank you for the information.

Maybe You can explain it a bit better. I may have underastand you wrong.

But I have already got the latest version of rme 3.4. installed.
I just need to import the discovered devices from HP NNM into CWK RME.

Greetings John

 

[nbowden]

Sorry, I mis-read your question. My answer is incorrect.

No, I do not know of a way to do this...sorry

Nigel.