Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Importing Custom Toolbars in later version
- Thread starter Speedee
- Start date
I think the way to do this is to find your acad.mnu file in r13
(Im not sure where it is on r13 but in 2000 its in the support folder)
and copy it over the 2000 one, but rename the 2000 .mnu file
to something else like .old just so you still have it.....
Actually I dont know if this will work, I usually use it
on 2000 to 2000 from one PC to another so they are the same,
not sure if it will work with r13, but its worth a shot!! Jay~
If its broken, just leave it and hope someone else fixes it!
~KeyTech
(Im not sure where it is on r13 but in 2000 its in the support folder)
and copy it over the 2000 one, but rename the 2000 .mnu file
to something else like .old just so you still have it.....
Actually I dont know if this will work, I usually use it
on 2000 to 2000 from one PC to another so they are the same,
not sure if it will work with r13, but its worth a shot!! Jay~
If its broken, just leave it and hope someone else fixes it!
~KeyTech
- Status
Similar threads
- Locked
- Question