We are currently investigating implementing Q in Q for our network and I want to make sure that I am setting the procurve switch up correctly.
We have a HP 3500yl switch with the premium service license installed.
We have placed the switch in QinQ svlan mode.
I have port 41 as a provider port in s-vlan 41 tagged
I have port 4 as a customer port in s-vlan 41 untagged
I have a pc/switch which tags packets to vlan 10 plugged into port 4 of the procurve
I also have a qinq aware device plugged into port 41
I just want to make sure that to get vlans double tagged I need single tagged packets entering the switch on the customer port 4.
Can somebody, who uses qinq, confirm this is the correct way to implement this please.
Thank you for your help.
We have a HP 3500yl switch with the premium service license installed.
We have placed the switch in QinQ svlan mode.
I have port 41 as a provider port in s-vlan 41 tagged
I have port 4 as a customer port in s-vlan 41 untagged
I have a pc/switch which tags packets to vlan 10 plugged into port 4 of the procurve
I also have a qinq aware device plugged into port 41
I just want to make sure that to get vlans double tagged I need single tagged packets entering the switch on the customer port 4.
Can somebody, who uses qinq, confirm this is the correct way to implement this please.
Thank you for your help.