Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Imagem HD BCM50 R2 Lost

Status
Not open for further replies.

actec

Technical User
May 29, 2012
19
thread1361-1627520

Hello Guys, I need an image of the HD BCM50 R2.
I need help with this, my BCM50 to power on, 2 red lights appears, after the led turns green power and the flashing red LED status shortly after the 2 red leds are fixed. I think that is a defect in hd, already tried the 2 types of reset and did nothing. Help me!

How do I try to copy the original hd or what files should copy to put in a new hd and redo the BCM50?

Thanks!
 
Have you tried connecting the BCM 50's hard disk to another computer via a USB to Sata lead to see if the disk can be accessed OK?. It does sound as if the hard disk is faulty. You will either need to purchase another release 2 hard disk that is from a working system. You might need to see if you can get hold of the multi image disk.

As for Acronis images, I've done two versions that fit on a DVD each for BCM 50 releases 1 and 2. You still need to have a good backup and the keycodes for that BCM unit.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Hello ... Thanks for listening firebird
I backup and updated license files on pc.
Already called the hd on pc via usb, I can access the folders. and everything.
Just know that not generate his image.
I think he is with some bad track.
You can give me a hand?
How can we do to get your picture?
thank you
 
Unless you live in the UK, I won't be able to get a DVD copy to you. However, there are other Tek-Tips members who know me in other countries and they might be able to help you as I have sent them the disks. I'd suggest that you add in where you are located, otherwise you will need to purchase another BCM release 2 hard disk or the Multi Image one from a supplier.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
hello firebird. I am in Brazil, Sao paulo. Here we no longer support avaya about this product. Do you know anyone here? grateful
 
I'll spend a few details about what happens to the BCM50. When I turn on the machine it boots and then gets the power leds green, and red LED status in both solids. You know what that means?
 
Sorry. The led status is orange
 
Telcodog
After burning the hair could recover the software and replace the HD.
The BCM50 this power ok.
The LEDs are green and solids can access via the network.
One thing calling me attention when I turn on the 32 + module in the main cabinet led expansion connector 1 does not light up.
In BEM indicating it is enabling for extensions.
I would make sure that the software is ok, how do I?
Thanks!
 

Hello everyone, I already managed to solve the problem of hdd BCM50 Release 2.
After using acronis could rebuild damaged partitions on hdd old and the new redo everything. Now he's working perfectly.
I am available for any doubt as to the procedure adopted.
hugs and thanks















 
Can you answer yes .... 'll do a text and then post. ok?
Or you are urgently?

hug.
 
Hello Firebird
I finished the text retrieval hd BCM50 to post here, but I think it was a little big.
I'll put in parts or how do I send you via email?
Can you help me?
I have an E1 interface R2mfc the BCM50 only that I can not listen to the voice of the PSTN.
the link is input or output, we do not have the sound on the other side, the person hears my voice, but I do not hear to her.
grateful
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top