Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I'm trying to VPN in to our Office

Status
Not open for further replies.

joopdog

MIS
Jun 30, 2002
28
US
Both our office's has WatchGuard

I'm trying to VPN in to our office (Firebox x750e - 62.136.116.110).

My Error Message (Firebox x1000 - 171.198.252.33):
12/14/07 17:59 firewalld[130]: deny out eth1 48 tcp 20 128 192.168.3.184 62.136.116.110 4912 1723 syn (wg_pptp)

I can VPN into Firebox x750e - 62.136.116.110 from anywhere except from Firebox x1000 - 171.198.252.33. What am I doing wrong?

Any help would be appreciated.
 
I had to create a PPTP policy and allow outbound service for port 1723.
To allow this service outbound:
Clients with private IP addresses behind your Firebox can connect to RAS servers on the Internet. The following step-by-step instructions guide you through enabling PPTP traffic outbound through the Firebox:
1. Open the Policy Manager with your current configuration file.
2. On the toolbar, click the Add Service (+) button.
You can also select Edit => Add Service. The Services dialog box appears.
3. Expand Packet Filters.
4. Select PPTP. Click Add. Click OK.
The PPTP service defaults to outgoing connections allowed. It is safe to leave these defaults. You may change them if you wish.
5. Click OK to close the PPTP Properties dialog box. Save the configuration file to the Firebox.

I hope this helps.

For more info, please see this FAQ:
About PPTP through the Firebox
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top