Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I'm trying to connect a Linksys BEF

Status
Not open for further replies.
Sinecure

Sinecure

IS-IT--Management
Jul 21, 2003
4
0
0
US
I'm trying to connect a Linksys BEFW11S4 Wireless-B Broadband Router to a Cisco 3550 Switch. But whenever I do this, it boots users off of the network. I never had this problem when I was using 3Com hubs.

I'm connecting the Linksys with a straight-through cable to a port on the switch that is NOT using PortFast. Should I be using a crossover cable, or setting the port to be designated as "X"?
 
Status
Not open for further replies.

Similar threads

PThomp3344
  • Locked
  • Question
Trying to connect to Cisco Unified Controller web interface: UC520W-16U-4FXO-K9
Replies
1
Views
94
bdk76
bdk76
Luzbel
  • Locked
  • Question
Connecting HVAC controller to network
Replies
0
Views
75
Luzbel
Luzbel
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
106
madwok
madwok
WinstonCH
  • Locked
  • Helpful tip
What is wrong with the diagram, there are people who will help to fix it? How do i do the configurat
Replies
1
Views
90
BIS
BIS
DTGMI
  • Locked
  • Question
Moving from Juniper SRX-240 to Cisco ??
Replies
0
Views
63
DTGMI
DTGMI

Part and Inventory Search

Sponsor

Back
Top