Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I'm been trying to complete the ins

Status
Not open for further replies.

donald long

Technical User
Oct 22, 2018
1
US
I'm been trying to complete the installation of 4 MC32 cards in a Nortel CS1000M. They are installed and cabled to the ELAN and TLAN switch. But I don't know how to enable the cards? Yeah I tried LD 32 ENLC but it didn't do a bit of good. Can someone help me get these enabled? All cards are disabled and unreg.

Thanks
Don Long
 
Have you done the local config on the cards for the ELAN so the PBX can talk to them? You are going to have to use Element Mangler also to add the cards then sync the node and transmit it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top