ILO Access through a firewall - port forwarding

[rpreston]

Can I setup all of my ILO boards on the same IP address through my firewall, and just give each one a different port mapped to the local ILO bard address ?

e.g.

80.41.42.10:55550 - ILO server 1
80.41.42.10:55551 - ILO server 2
80.41.42.10:55552 - ILO server 3

If I do this does ILO operate normally, or are there any problems at all ?


TIA


Rob

 

[KarveR]

when you port forward, your will need to set the correct port for ILO.

80.41.42.10:55550 -> ILOserver_1:ilo_port*
80.41.42.10:55551 -> ILOserver_2:ilo_port*
etc.

as long as you correctly specify the ilo port and address of ilo card, you can do this with no problems.


______________________________________________________________________
There's no present like the time, they say. - Henry's Cat.