IDU for all phones at once? 1

[Switchlady1]

Is there a way to invoke an IDU that would query every digital set in the switch all at once?

 

[bigindian65]

I am not aware of one. you could "reverse" by doing an LDIS Loop Shelf and get every disabled set in a loop that is disabled showing what would not IDU.

Mato' Was'aka

 

[Wings08]

If you want to find out which tns are disabled and/or not connected to phones you can perform a loop all in ld 30. You can also perform a inventory print in load 117. Look in the NTP for correct commands or search this site for nortel set inventory.

 

[zstic78]

You can try LD 117
INV GEN SETS
After you get the INV complete message
INV PRT SETS
will give you the following info.

Connected set
1140, 100 0 00 00, 1140 NTYS05AA 66 25 F8708C , DGTL , 2050

Set programmed but not connected.
1140, 100 0 00 08, <Unavailable>, DGTL , 2012

 

[Switchlady1]

zstic78, that was exactly what I needed...to see what's programmed but has no phone connected on the other end. I normally do that with an IDU command, but that would take FOREVER to do on such a large system. Thanks again!

 

[johnpoole]

that's a great load for that.. i use an excel macro to find sets that do not match their as built.. we end up a few that have grown displays.. (programed as eights, 2616 or worse 39xx..



john poole
bellsouth business
columbia,sc

 

[zstic78]

yeah then the user argues and says I have ALWAYS had this. LOL