Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IDLE SET DISPLAY 3

Status
Not open for further replies.

Canmi

Programmer
May 14, 2008
31
ES
HI
I WANT TO CHANGE THE NAME TO DISPLAY IN MY IP TERMINALS (1210, 1220 AND 1230) IN A CS1000E 5.5 IP, BUT WHEN DO I CHANGE THE IDLE SET DISPLAY IN LD 17, PARM, NO SHOW ME THE CHANGE IN THE TERMINAL.
ANY IDEA?
THANKS
 
The Brandline is a very low priority task and can take several minutes before it comes through.
 
How is several minutes? I made the change about 48 hours ago ... how can I change the priority of the brandline?

Thanks for your response
 
if you go to ld 22 and at the req prompt type ISS, is the correct info shown there?
 
Initially, everything appears correct:

LD 22
REQ iss

VERSION 4021

System type is - Communication Server 1000E/CP PM
CP PM - Pentium M 1.4 GHz

IPMGs Registered: 1
IPMGs Unregistered: 0
IPMGs Configured/unregistered: 2

RELEASE 5
ISSUE 50 J
IDLE_SET_DISPLAY Test

IPMG TYPE CSP/SW MSP APP FPGA BOOT DBL1 DBL2

4 0 MGC AH14 AA06 AA05 AA13 AH09 DSP1AA09 N/A
8 0 MGC UNKNOWN
12 0 MGC UNKNOWN


( Test is the assigned name)
 
It´s OK:

REQ chg
TYPE parm
LPIB
HPIB
500B
SL1B
DTIB
OB
NCR
MGCR
NCPU
CFWS
CML
ALRM
ERRM
DTRB
ABCD
K R
FCDR
PCDR
TPO
TSO
CLID
DUR5
MLDN
MARP
IPIE
FRPT
DCUS
MSCL
PMSI
NDIS
OCAC
MTRO
SBA_ADM_INS
SBA_USER
BCAP
IDLE_SET_DISPLAY Tecmo_Test
MODIFY yes
SUPPORTED_TEXT_ONLY yes
IDLE_DISP_STRING Tek-Tips Forum
IDLE_SET_DISPLAY Tek-Tips Forum
OK yes
ICON
MSEC
MSSD
NKEY
TKEY
 
does it show, if you unplug your phone wait a bit and plug it back in? Yea i know... Just asking.
 
Also do you currently see any idle message on your phones? NORTEL or whatever it was, so its just not updating? Or is nothing there to start with? Is it changing on all your other phones?
 
I know this may sound a silly question.

I have never used the 1200 series phones.

Do they support brandline ? Or is it a patch ?
 
Another silly question. Do you have more than 1 Call Server? What Signalling Server/Media card are the phones registering to?
 
I have this problem in a 1110, 1120 and 1130.

I have not found anything to indicate that this new series of phones do not support barndline

I have only one call server (no redundancy). The SS are CPPM. If I change this prompt with Element Manager, not me make the change.

Ah! Thanks to all

I´m going to try a i2002 Ip phone...
 
Hi.
I connect and programmed a 2004p2 ip phone, and it displays the name. The problem is with 1200 serial. I don´t have any 1100 serial. The Signaling Server is CPPM.

Any idea?

Thanks...
 
I had charge PEP´s in the CPPM Signaling Server, and the problem persist...
 
The 1110, 1120, 1210, 1220 as well as the 2001 and 2002 IP phones do not have a large enough display, and thereforedo not support brandlining.

This is why you are not seeing it. The 1240, 1140, 1150, 2004 adn M3904/5 will show the brandlining you have entered.

--
Fletch

Nortel Emergency Services PLM

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at
 
Cheers Fletch. I had a feeling of that, but as we never buy the smaller phones I couldn't check.

You DESERVE a star for the solution.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top