Identify if a DN is on multiple sets as KEY 0

[CommNav]

I am being tasked with identifying all DN's that are currently on mulitple TN's as KEY 0 in our PBX.

This is due to an upcoming e911 install and we have many buildings at our location and some numbers are in more than one building as Key 0 and our leadership wants each key 0 to be unique (for more than just the e911 install, but this is mainly driving the requirement).

We have close to 2800 TN's so to manually go through the TNB or DNB dump would be a long processs, I was wondering if there is a command in LD 20 or other LD that could run this type of report.

Thanks!

 

[KCFLHRC]

A DNB is about your only option. There isn't anything in LD 81 that will help you that I have found.

 

[smokinjoe2938]

print/dnb/cust0/dn# hit enterkey 4 times, this will show you on all sets if the extension is on key # and who is the marp owner

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.

 

[Firebird Scrambler]

Just download my version of the Conversion Utility tool at

http://www.ghtrout.com/conversionutility

There should be a word doc explaining how to use it. Using a DNB or TNB should give you the results you are looking for.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.