Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Identifiers !!!

Status
Not open for further replies.

Guest_imported

New member
Jan 1, 1970
0
Hi,


I have the follwing listing for $errpt -a


LABEL: NONE
IDENTIFIER: 9DBCFDEE

Date/Time: Mon Jul 1 13:13:35
Sequence Number: 1
Machine Id: 00009996A111
Node Id: mule01
Class: U
Type: NONE
Resource Name: errdemon
Resource Class: NONE
Resource Type: NONE
Location: NONE


could any one explain this and point out the error I am getting there. or dierct me for any line that expalins this.

many thanks.
 
Thanks AIXSPadmin,

My machine abnoamlly stops. On reboot it works for two / three days and stops again. Where I can see the error messages for this behaviour.

Thanks.
 
If the machine is stopping (locking up?), then the error log should have hardware and software errors in it. Another thing is to run diag against all hardware. Also, check your dump, if the system is stopping then hopefully you will have a good dump and can check with the sysdumpdev -L command. Just a couple of places to check first. It is hard to determine if it is hardware or software without any additional information.
 
Also, check for LED codes if it hangs. Sometimes it can break badly enough the error daemon cannot capture an error. IBM Certified -- AIX 4.3 Obfuscation
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top