IDD calling over DPNSS Link to Mitel3300

[PareshTC]

Hi

I am integrating a CS1K-E with a Mitel 3300 over DPNSS. The problem I am facing is wrt to International dialling from the Mitel 3300. The PSTN trunks are terminated on the CS1KE.

From the traces I can see that the called number is received in two parts. The CS1KE seems to start dailling once the first set of numbers hav been received without waiting for the remainder of the digits,

DPI R 63 2 2 SSRM-I *58*CW*Obx@@@@@CG]L^P#900185724184
DPO R 63 2 3 NIM *51*3#
DPI R 63 2 3 SSRM-C 09
DPO R 63 2 5 NAM *3*1 4#*167*48501*1*28#
DPI R 63 2 5 CRM 30
DPO R 63 2 0 CIM 30

Is there some config on the CS1K that needs changing? I have expanded the SPNs to 4 digits eg 0011, 0012 and so on.

 

[PareshTC]

Here is the RDB and TNB for the trunks,

TYPE RDB
CUST 00
ROUT 4
DES TIE-2-ACD
TKTP IDA
NPID_TBL_NUM 0
SIGL DPN
CNVT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
INAC NO
SPN NO
DSEL VOD
AUTO NO
ICOG IAO
TRMB YES
STEP
TARG
CLEN 16
BILN NO
INST
TIMR EOD 13952
RMA 5120
SRM 32640
RAS 13952
NRAG 30
DRNG NO
CDR YES
INC YES
LAST YES
QREC YES
OAL YES
AIA YES
OAN YES
OPD NO
NDP EXC 0
CDRX NO
NATL YES
CFWR NO
IDOP NO
MUS NO
PANS YES
TTBL 0
ACNI YES
PLEV 0
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

DES M3300
TN 063 01 VIRTUAL
TYPE RDC
CUST 0
NCOS 7
RTMB 4 1
PRIO XHP
PRDN 6330
CMF NO
TGAR 1
SIGL DPN
AST NO
IAPG 0
CLS UNR CND ECD WTA APN THFD SPCD
DDSL 63
AACR NO
DATE 2 FEB 2009

 

[PareshTC]

Can any of the DPNSS experts on this forum please help me out here?

I have got a little further in the troubleshooting and confirmation that the CS1K is not waiting for all the digits before outpulsing,

DPI R 63 1 0 ISRM-I 10 *1#*50*2802#*100*P.Spare*1#*19*Z#
DPI R 63 1 2 SSRM-I *58*CW*Obx@@@@@CHrCQp#900861085181
DAO R 60 28 1 ISRM-C 10 00861085181
DPO R 63 1 3 NIM *51*3#
DPI R 63 1 3 SSRM-C 234
DPO R 63 1 5 NAM *3*1 4#*167*48501*1*27#
DAI R 60 28 1 NAM *EC*01#*AA*NUMBER INCOMPLETE#
DPI R 63 1 5 CRM 30
DPO R 63 1 0 CIM 30

60 ==> Outgoing DASS2 Link
63 ==> DPNSS Link to the Mitel PBX

Please assist.

 

[Sympology]

NO idea about these systems, but is Overlapped DNIS enabled?

Most people spend their time on the "urgent" rather than on the "important."

 

[PareshTC]

Managed to fix it myself.

Problem was caused as FLEN in the SPN was set to 0 to allow any number fo digits to be allowed (this worked fine for extns). With this setting the CS1K would assume that it has got all digits in the first message over the DPNSS.

Once I set the FLEN to 16, it started to wait for 16 digits or the EOD "#". Once this started happening it would allow the last few digits or a # to be recieved before beginning outpulse, fixing the issue.