ICP3300: Modify the number

[nickcx]

In a bid to get the bottom of my earlier post (

http://www.tek-tips.com/viewthread.cfm?qid=1395524&page=2)

can anyone help with my next question:

We have a Siemen's ISDX with DPNSS link to our Mitel. Is it possible to amend the number that hits our Mitel from the Siemens (e.g. 077xxxxxxx)and modify it to +4477xxxxxx when it get's sent on to our phones?

e.g. External call 077xxxxxxx comes in, E1 card on ISDX passes to Mitel, Mitel amends number to +4477xxxxxxx

Cheers,
N

 

[Lundah]

Assuming the DPNSS link between the PBX's is Q.SIG (i.e., you use IMAT to program the Mitel interface), you could use CPN substitution to change how the numbers are displayed. If you need to actually modify the digits that are sent by the Mitel to the Siemens, you'd need to do that in Digit Modification on the routes involved.