icp sx200 console system time changing

[G0G3tt3r]

How do you enable a 4150 console to change the system time?

 

[EPearson]

The 4150 must be set up as a Sub-Attendant...which makes it a lot like a Superconsole 1000...the way people like to use digital phones making it a Sub-attendant doesn't always fit well

 

[kwbMitel]

A good place to find info like this is the Manual.

Date and Time Setup
Description
Idle Mitel display telephones continuously show the time and date (day, month, year). The console always displays the time but the date displays only when the console is idle. The time and date are also used by Message Waiting, Traffic Measurement, SMDR, and other features. The time may be displayed in 12- or 24-hour format.
The system time and/or date can be changed from the console, a subattendant telephone, and the phones listed in the linked document under Feature Availability below.
Feature Availability
Click here to see a list of the phones that can use this feature.
Conditions
• A time/date change may cause some traffic measurements to be lost, and can also affect Automatic Call Distribution (ACD) Reports. Care must be taken when setting the COS option for this feature.
• Subattendant telephones require enhanced subattendant functionality (see Subattendant - Enhanced Functions) to use this feature.
• Requires Feature Level 6 in System Option 102.
Programming
Enable COS Option 122 (Setup Time/Date) in the Class of Service of the device requiring use of this feature.
Set System Option 102 (Feature Level) to level 6.
If 12-hour time display is required, no clock options are required. If 24-hour time display is required, enable System Option 01 (24-Hour Clock).
Operation
Attendant Console
To set time:
• Press the FUNCTION key.
• Press the ATT FUNCTION softkey.
• Press the SET TIME softkey.
• Enter the desired time.
• Press the SET or PM softkey.
To set date:
• Press the FUNCTION key.
• Press the ATT FUNCTION softkey.
• Press the SET DATE softkey.
• Enter the desired date.
• Press the SET softkey.
Subattendant
To set the time from a subattendant telephone:
• Press SUPERKEY.
• Press the MORE softkey three times.
• Press the TIME softkey.
• Enter the time in the correct format.
• Press the AM or PM softkeys (if necessary).
• Press the SAVE softkey.
To set the date:
• Press SUPERKEY.
• Press the MORE softkey three times.
• Press the DATE softkey.
• Enter the date in the indicated format.
• Press the SAVE softkey.
5020, 5220 and 5224 IP telephones
To set the time:
• Press SUPERKEY.
• Press the MORE repeatedly until TIME? appears on the display.
• Press the YES softkey.
• Enter the time in the correct format.
• Press the AM or PM softkeys (if necessary).
• Press the SAVE softkey.
To set the date:
• Press SUPERKEY.
• Press the MORE repeatedly until DATE? appears on the display.
• Press the YES softkey.
• Enter the date in the indicated format.
• Press the SAVE softkey.
Family 5 Telephones:
5330 Phones:
To set the time:
• Press the key you have programmed as Superkey.
• Press No until Time? appears and then press Yes.
• Enter the time in the correct format.
• Press the AM or PM softkeys (if necessary).
• Press Save.
To set the date:
• Press the key you have programmed as Superkey.
• Press No until Date? appears and then press Yes.
• Enter the date in the correct format.
• Press Save.
5340 Phones:
To set the time:
• Press the key you have programmed as Superkey.
• Press More until Time appears and then press Time.
• Enter the time in the correct format.
• Press the AM or PM softkeys (if necessary).
• Press Save.
To set the date:
• Press the key you have programmed as Superkey.
• Press More until Date appears and then press Date.
• Enter the date in the correct format.
• Press Save.


**********************************************
What's most important is that you realise ... There is no spoon.