Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ibm x342 display question
- Thread starter Tureem
- Start date
Hi,
he's asking for a doctor
It basically means that the system management processor found a problem. Put off the top cover and take a look at the diagnostic panel. The Hardware Maintenance Manual (ftp://ftp.pc.ibm.com/pub/pccbbs/pc_servers_pdf/24p2922.pdf) will explain you everything about error messages.
Peace
W
he's asking for a doctor
It basically means that the system management processor found a problem. Put off the top cover and take a look at the diagnostic panel. The Hardware Maintenance Manual (ftp://ftp.pc.ibm.com/pub/pccbbs/pc_servers_pdf/24p2922.pdf) will explain you everything about error messages.
Peace
W
neilcresswell
Technical User
The (i) is an informational message
the (!) is a system error message.
More than likely your system is running on non-redundant power (one cable unplugged). as Wacammaw stated, look at the lightpath diagnostics panel inside the machine to isolate the component that is causing the error.
N
the (!) is a system error message.
More than likely your system is running on non-redundant power (one cable unplugged). as Wacammaw stated, look at the lightpath diagnostics panel inside the machine to isolate the component that is causing the error.
N
- Status
