Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IBM Netfinity 5500/EXP200 DIP settings HELP!
- Thread starter mapv281
- Start date
Might be helpful if you told us what it is you are trying to do?
There really is no "DIP" settings for a Netfinity 5500 that you would have to be concerned about. On the EXP200 only thing you would need to worry about is if you wanted to split the backplane so you could hook it up to either seperate channels on a raid controller or use half the drives for one server and half the drives for another server.
There really is no "DIP" settings for a Netfinity 5500 that you would have to be concerned about. On the EXP200 only thing you would need to worry about is if you wanted to split the backplane so you could hook it up to either seperate channels on a raid controller or use half the drives for one server and half the drives for another server.
- Status
