CapnLockheed
Technical User
I'm building a new workstation from a barbones IBM Intellistaton Z-Pro. I installed dual 2.6Ghz
Xeons and 2Gb RAM all tested and working. On startup I get a beep error code of 2-2-3: CMOS
power failure and checksum checks failed. It then starts to post and reports the following
error codes:
162: Invalid Configuration Info or CMOS RAM Checksum Failure
184: Bad Power on Password
It then promptly shuts down. I've tried everything I can think of. Replaced the battery
Cleared the CMOS by moving the jumper. I can't
flash a new BIOS as it won't stay on long enough. I'm starting to think perhaps I have a bad mobo?
Any help would be greatly appreciated!!
Cheers....Cristofe Chabot
Stonetree Productions
Xeons and 2Gb RAM all tested and working. On startup I get a beep error code of 2-2-3: CMOS
power failure and checksum checks failed. It then starts to post and reports the following
error codes:
162: Invalid Configuration Info or CMOS RAM Checksum Failure
184: Bad Power on Password
It then promptly shuts down. I've tried everything I can think of. Replaced the battery
Cleared the CMOS by moving the jumper. I can't
flash a new BIOS as it won't stay on long enough. I'm starting to think perhaps I have a bad mobo?
Any help would be greatly appreciated!!
Cheers....Cristofe Chabot
Stonetree Productions
