Our ARCserve environment is running on ARCserve 11.5 SP3 and the Windows platforms are all Windows 2003 SP1 IBM servers Stand-alone servers connected to a Hitachi NSC-55 SAN.
The 64Bit Server ONLY have StorPort Drivers......we upgraded Version: 9.1.2.19 Release Date: 2007-04-26
But whenever we configure the tape engine , the tape.log shows the following error :
2007/07/27 15:55:47 [07ac] Bad Device handle printing SCSI Port Error...
2007/07/27 15:55:47 [07ac] 07/27 15:55:47 ABSL: 2000 SCSICommandRetry: NT Err or that can be retried. CMD:[12], Error 1306
007/07/27 15:55:47 [07ac] =>ABSL: 2000 Error. MS=1306 [Indicates two revision levels are incompatible
What is the root cause of this error( 1306 ) ? Is it HBA , MS , IBM
Has anyone configured the SAN using 64 bit Server and if yes what drivers of ibm is being used
Thanks in advance for all the help
cheers
The 64Bit Server ONLY have StorPort Drivers......we upgraded Version: 9.1.2.19 Release Date: 2007-04-26
But whenever we configure the tape engine , the tape.log shows the following error :
2007/07/27 15:55:47 [07ac] Bad Device handle printing SCSI Port Error...
2007/07/27 15:55:47 [07ac] 07/27 15:55:47 ABSL: 2000 SCSICommandRetry: NT Err or that can be retried. CMD:[12], Error 1306
007/07/27 15:55:47 [07ac] =>ABSL: 2000 Error. MS=1306 [Indicates two revision levels are incompatible
What is the root cause of this error( 1306 ) ? Is it HBA , MS , IBM
Has anyone configured the SAN using 64 bit Server and if yes what drivers of ibm is being used
Thanks in advance for all the help
cheers
