IBM blade 8832 memory issue

[bmin]

After installed new memory (1GB DDR 2100 Regisiter)The blade center logs shows

42 E BLADE_10 09/07/06, 07:21:47 (SN#K10WE39917B) POSTBIOS: 289 DIMM D02 is Disable.

43 E BLADE_10 09/07/06, 07:21:47 (SN#K10WE39917B) POSTBIOS: 289 DIMM D01 is Disable.

44 E BLADE_10 09/07/06, 07:21:46 (SN#K10WE39917B) POSTBIOS: 289 Memory Row 1 Double Bit Error.

45 E BLADE_10 09/07/06, 07:21:45 (SN#K10WE39917B) POSTBIOS: 289 DIMM D02 is Disable.

46 E BLADE_10 09/07/06, 07:21:45 (SN#K10WE39917B) POSTBIOS: 289 DIMM D01 is Disable.

47 E BLADE_10 09/07/06, 07:21:44 (SN#K10WE39917B) POSTBIOS: 289 Memory Row 0 Double Bit Error.

50 E BLADE_10 09/07/06, 07:21:25 (SN#K10WE39917B) System Memory Error

What's the problem it would be? If this is the memory issue, what kind of isuue? Thanks in advance!

 

[victorv]

hi,
- Type-Model : 8832-xxx ?
- which were the slot occupied by the original memory ?
- which the new ?

or there was not memory ?

Remove the newly added DIMMs and restore the original situation: the original DIMMs in the original slots.

and see the log: does the server go ?

bye
vittorio

 

[bmin]

Changed the new modules and got fixed. One more question: is this possible the module failed on the sleeping mode? As I tested those modules on a memory tester, it shows slef-refresh test failure.

Thanks again!

Bigang Min