IBM AIX 4.2 added NIC TCP/IP issues

[antix]

Hello,

We just upgraded a RISC 600 MCA ported AIX 4.2 box with a NIC. The problem now exists that IP is working fine internally but it cannot access the router nor anything outside. Diagnostics yeilds all is well HW-wise. This
card will not communicate via AUI nor BNC connection. any help would be apreciated.

PS thinking but have not tried updating drivers for card and/or TCP/IP cheifly the card was difficult to come by have no idea where I will get the drivers.

 

[DonDavisFCB]

Verify the following with ifconfig en0:
IP Address
Subnet Mask
Default Gateway

Is the adapter active?
Have you configured en0 or et0?
- There is a difference, you want en0

Is there a duplicate IP Address on the network?

Hope this helps

 

[antix]

Looks like eno and et0 are configured. There is no duplicate in the network. Other than that it pings internally just fine.