I need a station license dedicated for the remote site and the i2050 license for the remote client. Instead of a BSR222 I have a Cisco Model 5505 router that is already set up for VPNing in and is in use. Do I need anything else in terms of BCM400 hardware? Someone said I needed NTKC0060 4 port VoIP Trunk software - use one port to access the BCM from the remote site. Normally that VoIP software would be used to connect tie lines between two BCMs. Is that correct?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
i2050 softphone client over Internet to Cisco 5505 Router 1
- Thread starter incensed
- Start date
-
1
- #2
adamandamy
Technical User
No SIP trunk software needed. As long as you have the BCM IP client license and the PC has IP connectivity to the BCM, you should be good to go.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question